無錫市偉遠紡機有限公司與無錫達尼智能科技有限公司的SFERA PLUS 智能節能控制系統介紹如下
在不知道實際織物的溫度和實際停留時間的情況下，操作工將織物停留在烘箱內
的時間過長，其實比實際需要的時間長得多。
Without knowing the real fabric temperature, and the real dwell-time, the operator leaves the fabric too much time
into your stenter, much longer than really needed.
如果您每月生產 1000,000 米的面料，而您安裝了這套 SFERA PLUS，那么僅將速
度提高 1m / min（即：從 20m / min 到 21m / min = + 5％），您最終將增加產量 5％，
即每月 50,000 米；以每米 1.0 元的價格，每月將增加 50,000 元無需額外費用!
If you produce 1000,000 meters of fabric per month, and with your new SFERA PLUS you increase the speed, let's say,
of 1m/min only (i.e.: from 20m/min to 21m/min = +5%) you will get a 5 % increase of end product, which means 50,000
meters per month ; this sold at 1.0 CN$ per meter, will bring you an increase of 50,000 CN$ per month ... with no
additional costs !
